PATENT PENDING
INTRODUCING OCTOKEYS
OVERVIEW
Octokeys is a QUICK and SIMPLE solution
for originating a key on the HU100
GM 10 cut system. V -Series Codes.
The OCTOKEYS system contains
8 rings that have 8 keys each on them.
Each OCTOKEY has a
different number stamped
on each side of the head.
You simply try each OCTOKEY key from the
DOOR LOCK SET in the door lock until you
find one that turns.
You will then check the number of
that OCTOKEY.
Let’s say for example its OCTOKEY #18.
Look on the OCTOKEY IGNITION CHART.
It will give you four OCTOKEYS
to try in the ignition.
OCTOKEY numbers 66, 74, 82, and 90.
One of those OCTOKEYS
will turn in the ignition!
You can now depress the retainer and
remove to get the keycode off the
lock cylinder.!!
OCTOKEYS may also be used to unlock cars!
Non invasive and quick!
Most GM Push to Start Cars can be opened
with your OCTOKEY set.
Click here to see the instructions
IF YOU WANT TO KNOW THE CUTS OF AN OCTOKEY # CLICK HERE
Octokeys have been out now for over a year and here are some of the things we have found out to make it easier to use!
ALWAYS CHECK THE APPLICATION CHART
-
There may be MORE than 1 key that will turn both directions in the door. If you find a key that turns in both directions and you try the ignition keys and they do not turn, finish testing the doors keys to see if there is another key that turns both ways as well.
-
DO NOT jiggle the keys in the doors. Just try them while turning left and right. Do not force.
-
Some door locks are worn as well. While trying the doors keep track of any key # that turns in one direction. Use this/these keys if there is more than one, to determine the ignition keys to use from the instructions. Make sure to lubricate the lock you are working on.
-
The 10 cut ignition locks wear out quickly. It is a good idea to use a pair of vise grips to add a little more torque while trying the ignition keys. Not enough to bend but just a bit more torque.
-
Remove the ignition and CUT BY CODE. IF you cannot make sense of the code or if lock is worn simply remove the tumblers to see the depth number stamped on it. Replace any badly worn tumblers. Removing the lock is the easiest and quickest way.
One of the 32 door keys will turn in the door. It could be the first key, maybe the 16th key maybe the last. But one of them will turn in the door. Check the chart and it will tell you which of FOUR keys to try in the ignition!